 |
 |
 |
|
|
Top-Of-The-Line Filter Housings
Flowmatic's top-of-the-line filter
housings are rated number one in the industry, offering both
quality and price! Manufactured from the highest quality NSF
listed, FDA grade polypropylene, they are available in a wide
range of models, types, colors and pipe fitting. Filter housings
are rated for temperatures to 125°F (52°C) and pressures to 125
psid (8.75 bar). They are burst tested at 500 psi and 150,000
cycles. Custom models are available by special request. |
|
FLOW-MAX® PLEATED CARTRIDGES |
| Types |
 |
 |
| Standard |
Jumbo |
 |
 |
| Full Flow |
High Temp |
|
Flow-Max® pleated cartridges cut
filtration costs three ways. Here's how:
Flow-Max
cartridges are pleated and have more surface area. Therefore,
they filter longer and fewer replacement cartridges are needed.
Flow-Max cartridges are cleanable. Therefore, they can be
cleaned and reused, five micron and up.
Flow-Max cartridges have lower pressure drop, compared to
"depth" cartridges. Therefore, smaller filter housings are
required for the same flow rate, so filter housing costs are
reduced. (See chart below). |
 |
|